Hussain Abdullah TofaHire me

Metricool Threads Video Error: The Hidden 430 MB Limit and the Fix

SEO & Social Media4 min readBy Hussain Abdullah Tofa
Metricool Threads Video Error: The Hidden 430 MB Limit and the Fix

If you schedule videos to Threads with Metricool, you may know this one: the post is planned, the time comes, and instead of a published video you get a red ERROR in the planner. No clear reason. The same video goes out fine on other platforms.

I manage the social posting for a YouTube channel, and I saw this error almost every day on our full videos. So I sat down, went through every Threads video we had sent, and wrote down the size, the length and the result of each one. This post is what I found, and the fix I use now.

The short answer

  • Threads says a video can be up to 1 GB. In practice, through Metricool, every video of mine over about 430 MB failed.
  • The length was not the problem. Only the file size was.
  • The fix: export a smaller copy of the video (H.264, 1080p, quality 23) for Threads. My 535 MB video became 80 MB with no difference I could see.

What Threads and Metricool allow for video

RuleOn paperWhat I saw in real use
LengthUp to 5 minutes (300 seconds)Correct. Metricool does not take a longer video for Threads.
File sizeUp to 1 GBOnly up to about 430 MB. Everything bigger failed.
FormatMP4 or MOVMP4 with H.264 video and AAC sound, normal (SDR) colour. I never had a problem with this.

So there are really two limits to remember for a Threads video in Metricool: under 5 minutes and under about 430 MB. The first one is written down. The second one is not written anywhere I could find.

How I found the 430 MB limit

Over two weeks we posted 36 full videos to Threads through Metricool. I put them in a list with size, length and result.

  • 31 videos were published. The biggest of them was 428 MB.
  • 5 videos failed. They were 454, 470, 535, 567 and 689 MB.

Not one video over 430 MB was published, and not one video under it failed. That is a very clean line.

At first I thought the length was the cause, because long videos are also big. It was not. A video of 4 minutes 2 seconds and 310 MB was published. A shorter video of 3 minutes 15 seconds, but 454 MB, failed. Both were well under the 5 minute limit.

I cannot tell you if the limit sits with Threads or with the way Metricool sends the file. From the outside you only see the error. But the number was the same every time, so I now treat 430 MB as the real limit.

The fix: make a smaller copy for Threads

Our videos come out of the editor at a high bitrate. That is good for YouTube, and far more than a phone screen on Threads needs. So for Threads I export a second, smaller copy and keep the original for everything else.

With HandBrake (free, Windows and Mac)

  1. Open the video in HandBrake.
  2. Summary tab: Format MP4, tick Web Optimized.
  3. Dimensions tab: resolution limit 1080p HD.
  4. Video tab: encoder H.264 (x264), Constant Quality RF 23, preset Very Fast.
  5. Audio tab: AAC, bitrate 128.
  6. Start the encode, then upload the new file to Metricool for the Threads post.

With FFmpeg (one command)

ffmpeg -i input.mp4 -vf "scale=-2:'min(1080,ih)'" -c:v libx264 -preset veryfast -crf 23 -maxrate 8M -bufsize 16M -pix_fmt yuv420p -c:a aac -b:a 128k -movflags +faststart threads.mp4

What the parts mean, in plain words:

  • scale: bring a 4K video down to 1080p; a 1080p video stays as it is.
  • -crf 23: the quality level. A lower number means better quality and a bigger file. 23 is the normal default.
  • -maxrate 8M: a ceiling, so a very busy scene cannot blow up the file size.
  • -movflags +faststart: makes the file start playing quickly online.

My result

My test video was 535 MB, one of the sizes that always failed. With the settings above it came out at 80 MB. The encode took about 5 minutes.

I played the original and the copy side by side on a 27 inch monitor and could not see a difference. On a phone, where most people watch Threads, there is even less to see.

80 MB is far inside the range where every one of my 31 videos was published. If your copy still comes out over 430 MB, raise the quality number a little (24 or 25) or lower the maximum bitrate to 6M.

Quick checklist before you schedule a Threads video in Metricool

  • Is it under 5 minutes?
  • Is the file under about 430 MB? If not, export a smaller copy first.
  • Is it an MP4 with H.264 video?

These numbers come from my own posts in October and November 2026. Platforms change their limits without telling anyone, so if you see something different, let me know and I will update this post.